Thursday 29 March 2012

Bluetooth Headset

Simple mod from last Saturday night (I really need to get out more!).

I have a pair of bluetooth headphones but unfortunately the headband is broken and one of the speakers is a bit dodgy so I decided to mod it to have a 3.5mm socket.



More after the break.

Thursday 15 March 2012

Fire Detector 2

So I set up the Chipkit Uno32 with the temperature sensor TMP36 from oomlout.com, installed the serial port monitor on the laser pc and tested the system. All fine so far.


Tuesday 13 March 2012

Fire Detector

After Martins fire, and have a near miss myself I am planning to build a fire detection system for my laser. I am already building an Axolotl temperature sensor system (which I am logging at the moment) so when that is complete I will have a look at using a similar system for fire detection. Whilst the temp sensor is being finished I am going to log the temperature in the laser to see what sort of range I am dealing with. For this I am going to use the chipkit / arduino prototype for the Axolotl system and write something simple to monitor the com port on the PC.


I will strip the LED and buzzer off and hook up the temp sensor directly.

More details and code will be published when I have it hooked up.

Thursday 8 March 2012

Vinyl Cutter/Plotter Re-wiring

After I re-wired Braunston Ltd's vinyl cutter for the 5th time they finally admitted defeat and purchased a new one from CTR Lasers. This meant that I was free to mess around with the scrapped one.